چراغ قرمز روشن میشه… و هارد ورژن رو نشون نمیده… فرموری رو هم که میزنم قبول نمیکنه مدل دستگاهم s9 هست

    تازه وارد سوال شده در خرداد ۱۷, ۱۳۹۸ در آلت کوین ها.
    افزودن نظر
    7 پاسخ(ها)

      از کدوم استخر استفاده میکنی . فکر کنم از استخر باشه

      کاردان پاسخ داده شده در خرداد ۱۸, ۱۳۹۸.
      افزودن نظر

        استخر btc و f2pool و استخر پیش فرض که با زدن دکمه رست میاد رو تست کردم جواب نمیده

        تازه وارد پاسخ داده شده در خرداد ۱۸, ۱۳۹۸.
        افزودن نظر

          از slushpool استفاده کن منم همین مشکل رو داشتم…

           

          تازه وارد پاسخ داده شده در خرداد ۱۸, ۱۳۹۸.
          افزودن نظر

            مشکل از استخرته به احتمال قوی

            عوض کن استخرتو

            اگر راهنمایی بیشتری خواستی پیام بده

            @vyekta

            آشنا پاسخ داده شده در خرداد ۱۸, ۱۳۹۸.
            افزودن نظر

              استخر slushpool  رو هم امتحان کردم همچنان هشت ریت نمیده … فکر کنم مشکلش فرمور باشه که آپگرید نمیشه

              تازه وارد پاسخ داده شده در خرداد ۱۸, ۱۳۹۸.
              افزودن نظر

                log دستگاه رو بفرست ببینیم مشکل چیه. فنها سالمن ؟

                متخصص پاسخ داده شده در خرداد ۱۸, ۱۳۹۸.
                افزودن نظر

                  [ ۰٫۰۰۰۰۰۰] Booting Linux on physical CPU 0x0
                  [ ۰٫۰۰۰۰۰۰] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
                  [ ۰٫۰۰۰۰۰۰] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
                  [ ۰٫۰۰۰۰۰۰] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
                  [ ۰٫۰۰۰۰۰۰] Machine model: Xilinx Zynq
                  [ ۰٫۰۰۰۰۰۰] cma: CMA: reserved 128 MiB at 16800000
                  [ ۰٫۰۰۰۰۰۰] Memory policy: Data cache writealloc
                  [ ۰٫۰۰۰۰۰۰] On node 0 totalpages: 126976
                  [ ۰٫۰۰۰۰۰۰] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
                  [ ۰٫۰۰۰۰۰۰] Normal zone: 992 pages used for memmap
                  [ ۰٫۰۰۰۰۰۰] Normal zone: 0 pages reserved
                  [ ۰٫۰۰۰۰۰۰] Normal zone: 126976 pages, LIFO batch:31
                  [ ۰٫۰۰۰۰۰۰] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
                  [ ۰٫۰۰۰۰۰۰] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
                  [ ۰٫۰۰۰۰۰۰] pcpu-alloc: [0] 0 [0] 1
                  [ ۰٫۰۰۰۰۰۰] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
                  [ ۰٫۰۰۰۰۰۰] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
                  [ ۰٫۰۰۰۰۰۰] PID hash table entries: 2048 (order: 1, 8192 bytes)
                  [ ۰٫۰۰۰۰۰۰] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
                  [ ۰٫۰۰۰۰۰۰] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
                  [ ۰٫۰۰۰۰۰۰] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
                  [ ۰٫۰۰۰۰۰۰] Virtual kernel memory layout:
                  [ ۰٫۰۰۰۰۰۰] vector : 0xffff0000 – 0xffff1000 ( 4 kB)
                  [ ۰٫۰۰۰۰۰۰] fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)
                  [ ۰٫۰۰۰۰۰۰] vmalloc : 0xdf800000 – 0xff000000 ( 504 MB)
                  [ ۰٫۰۰۰۰۰۰] lowmem : 0xc0000000 – 0xdf000000 ( 496 MB)
                  [ ۰٫۰۰۰۰۰۰] pkmap : 0xbfe00000 – 0xc0000000 ( 2 MB)
                  [ ۰٫۰۰۰۰۰۰] modules : 0xbf000000 – 0xbfe00000 ( 14 MB)
                  [ ۰٫۰۰۰۰۰۰] .text : 0xc0008000 – 0xc06da8ac (6987 kB)
                  [ ۰٫۰۰۰۰۰۰] .init : 0xc06db000 – 0xc070e380 ( 205 kB)
                  [ ۰٫۰۰۰۰۰۰] .data : 0xc0710000 – 0xc0757138 ( 285 kB)
                  [ ۰٫۰۰۰۰۰۰] .bss : 0xc0757144 – 0xc0797bfc ( 259 kB)
                  [ ۰٫۰۰۰۰۰۰] Preemptible hierarchical RCU implementation.
                  [ ۰٫۰۰۰۰۰۰] Dump stacks of tasks blocking RCU-preempt GP.
                  [ ۰٫۰۰۰۰۰۰] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
                  [ ۰٫۰۰۰۰۰۰] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
                  [ ۰٫۰۰۰۰۰۰] NR_IRQS:16 nr_irqs:16 16
                  [ ۰٫۰۰۰۰۰۰] ps7-slcr mapped to df802000
                  [ ۰٫۰۰۰۰۰۰] zynq_clock_init: clkc starts at df802100
                  [ ۰٫۰۰۰۰۰۰] Zynq clock init
                  [ ۰٫۰۰۰۰۱۴] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
                  [ ۰٫۰۰۰۲۹۱] ps7-ttc #0 at df804000, irq=43
                  [ ۰٫۰۰۰۵۹۲] Console: colour dummy device 80×30
                  [ ۰٫۰۰۰۶۲۱] Calibrating delay loop… 1332.01 BogoMIPS (lpj=6660096)
                  [ ۰٫۱۰۰۲۳۹] pid_max: default: 32768 minimum: 301
                  [ ۰٫۱۰۰۴۴۵] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
                  [ ۰٫۱۰۰۴۶۴] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
                  [ ۰٫۱۰۲۶۲۹] CPU: Testing write buffer coherency: ok
                  [ ۰٫۱۰۲۹۴۱] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
                  [ ۰٫۱۰۲۹۹۹] Setting up static identity map for 0x4cb118 – 0x4cb170
                  [ ۰٫۱۰۳۲۱۸] L310 cache controller enabled
                  [ ۰٫۱۰۳۲۳۸] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
                  [ ۰٫۱۸۰۹۸۵] CPU1: Booted secondary processor
                  [ ۰٫۲۷۰۲۱۷] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
                  [ ۰٫۲۷۰۳۴۷] Brought up 2 CPUs
                  [ ۰٫۲۷۰۳۶۶] SMP: Total of 2 processors activated.
                  [ ۰٫۲۷۰۳۷۴] CPU: All CPU(s) started in SVC mode.
                  [ ۰٫۲۷۱۰۳۱] devtmpfs: initialized
                  [ ۰٫۲۷۳۴۵۵] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
                  [ ۰٫۲۷۴۶۴۶] regulator-dummy: no parameters
                  [ ۰٫۲۸۱۹۸۵] NET: Registered protocol family 16
                  [ ۰٫۲۸۴۱۴۹] DMA: preallocated 256 KiB pool for atomic coherent allocations
                  [ ۰٫۲۸۶۴۱۸] cpuidle: using governor ladder
                  [ ۰٫۲۸۶۴۳۲] cpuidle: using governor menu
                  [ ۰٫۲۹۳۷۹۱] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
                  [ ۰٫۲۹۵۳۰۳] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
                  [ ۰٫۲۹۵۳۱۷] hw-breakpoint: maximum watchpoint size is 4 bytes.
                  [ ۰٫۲۹۵۴۲۶] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
                  [ ۰٫۳۱۷۱۵۴] bio: create slab <bio-0> at 0
                  [ ۰٫۳۱۸۵۳۹] vgaarb: loaded
                  [ ۰٫۳۱۹۲۲۵] SCSI subsystem initialized
                  [ ۰٫۳۲۰۱۰۲] usbcore: registered new interface driver usbfs
                  [ ۰٫۳۲۰۳۲۱] usbcore: registered new interface driver hub
                  [ ۰٫۳۲۰۵۶۴] usbcore: registered new device driver usb
                  [ ۰٫۳۲۱۲۶۳] media: Linux media interface: v0.10
                  [ ۰٫۳۲۱۴۲۵] Linux video capture interface: v2.00
                  [ ۰٫۳۲۱۶۶۷] pps_core: LinuxPPS API ver. 1 registered
                  [ ۰٫۳۲۱۶۷۹] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
                  [ ۰٫۳۲۱۸۰۱] PTP clock support registered
                  [ ۰٫۳۲۲۱۵۸] EDAC MC: Ver: 3.0.0
                  [ ۰٫۳۲۳۳۴۷] Advanced Linux Sound Architecture Driver Initialized.
                  [ ۰٫۳۲۶۰۷۱] DMA-API: preallocated 4096 debug entries
                  [ ۰٫۳۲۶۰۸۴] DMA-API: debugging enabled by kernel config
                  [ ۰٫۳۲۶۱۶۰] Switched to clocksource arm_global_timer
                  [ ۰٫۳۴۷۰۰۵] NET: Registered protocol family 2
                  [ ۰٫۳۴۷۶۶۱] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
                  [ ۰٫۳۴۷۷۱۸] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
                  [ ۰٫۳۴۷۸۰۲] TCP: Hash tables configured (established 4096 bind 4096)
                  [ ۰٫۳۴۷۸۴۵] TCP: reno registered
                  [ ۰٫۳۴۷۸۶۲] UDP hash table entries: 256 (order: 1, 8192 bytes)
                  [ ۰٫۳۴۷۸۹۲] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
                  [ ۰٫۳۴۸۱۲۳] NET: Registered protocol family 1
                  [ ۰٫۳۴۸۴۶۰] RPC: Registered named UNIX socket transport module.
                  [ ۰٫۳۴۸۴۷۲] RPC: Registered udp transport module.
                  [ ۰٫۳۴۸۴۸۰] RPC: Registered tcp transport module.
                  [ ۰٫۳۴۸۴۸۸] RPC: Registered tcp NFSv4.1 backchannel transport module.
                  [ ۰٫۳۴۸۵۰۱] PCI: CLS 0 bytes, default 64
                  [ ۰٫۳۴۸۹۲۵] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
                  [ ۰٫۳۵۰۹۰۳] futex hash table entries: 512 (order: 3, 32768 bytes)
                  [ ۰٫۳۵۲۹۴۷] jffs2: version 2.2. (NAND) © ۲۰۰۱-۲۰۰۶ Red Hat, Inc.
                  [ ۰٫۳۵۳۱۳۷] msgmni has been set to 967
                  [ ۰٫۳۵۳۸۹۲] io scheduler noop registered
                  [ ۰٫۳۵۳۹۰۵] io scheduler deadline registered
                  [ ۰٫۳۵۳۹۴۱] io scheduler cfq registered (default)
                  [ ۰٫۳۶۳۲۹۸] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
                  [ ۰٫۳۶۳۳۱۸] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
                  [ ۰٫۴۸۸۵۱۵] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
                  [ ۱٫۰۵۵۸۴۷] console [ttyPS0] enabled
                  [ ۱٫۰۶۰۱۰۶] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
                  [ ۱٫۰۶۷۷۲۷] [drm] Initialized drm 1.1.0 20060810
                  [ ۱٫۰۸۴۶۵۲] brd: module loaded
                  [ ۱٫۰۹۴۰۲۵] loop: module loaded
                  [ ۱٫۱۰۳۴۲۵] e1000e: Intel(R) PRO/1000 Network Driver – 2.3.2-k
                  [ ۱٫۱۰۹۲۵۷] e1000e: Copyright(c) 1999 – 2013 Intel Corporation.
                  [ ۱٫۱۱۶۹۹۲] libphy: XEMACPS mii bus: probed
                  [ ۱٫۱۲۱۳۵۶] ————- phy_id = 0x3625e62
                  [ ۱٫۱۲۶۰۶۷] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
                  [ ۱٫۱۳۴۸۶۷] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
                  [ ۱٫۱۴۱۵۱۹] ehci-pci: EHCI PCI platform driver
                  [ ۱٫۱۴۸۹۰۴] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
                  [ ۱٫۱۵۵۷۱۴] usbcore: registered new interface driver usb-storage
                  [ ۱٫۱۶۲۶۱۵] mousedev: PS/2 mouse device common for all mice
                  [ ۱٫۱۶۸۷۳۸] i2c /dev entries driver
                  [ ۱٫۱۷۵۶۲۸] zynq-edac f8006000.ps7-ddrc: ecc not enabled
                  [ ۱٫۱۸۱۱۶۳] cpufreq_cpu0: failed to get cpu0 regulator: -19
                  [ ۱٫۱۸۷۰۶۶] Xilinx Zynq CpuIdle Driver started
                  [ ۱٫۱۹۱۹۰۴] sdhci: Secure Digital Host Controller Interface driver
                  [ ۱٫۱۹۸۰۴۷] sdhci: Copyright(c) Pierre Ossman
                  [ ۱٫۲۰۲۳۴۰] sdhci-pltfm: SDHCI platform and OF driver helper
                  [ ۱٫۲۰۹۲۰۸] mmc0: no vqmmc regulator found
                  [ ۱٫۲۱۳۲۱۹] mmc0: no vmmc regulator found
                  [ ۱٫۲۵۶۱۸۰] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
                  [ ۱٫۲۶۴۸۵۴] usbcore: registered new interface driver usbhid
                  [ ۱٫۲۷۰۳۶۲] usbhid: USB HID core driver
                  [ ۱٫۲۷۵۰۶۵] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
                  [ ۱٫۲۸۱۳۵۹] nand: Micron MT29F2G08ABAEAWP
                  [ ۱٫۲۸۵۳۳۳] nand: 256MiB, SLC, page size: 2048, OOB size: 64
                  [ ۱٫۲۹۱۲۷۶] Bad block table found at page 131008, version 0x01
                  [ ۱٫۲۹۷۴۹۴] Bad block table found at page 130944, version 0x01
                  [ ۱٫۳۰۳۵۴۱] ۳ ofpart partitions found on MTD device pl353-nand
                  [ ۱٫۳۰۹۳۱۵] Creating 3 MTD partitions on “pl353-nand”:
                  [ ۱٫۳۱۴۴۱۴] ۰x000000000000-0x000002000000 : “BOOT.bin-env-dts-kernel”
                  [ ۱٫۳۲۲۴۷۰] ۰x000002000000-0x00000b000000 : “angstram-rootfs”
                  [ ۱٫۳۲۹۷۸۱] ۰x00000b000000-0x000010000000 : “upgrade-rootfs”
                  [ ۱٫۳۴۰۴۸۵] TCP: cubic registered
                  [ ۱٫۳۴۳۷۲۳] NET: Registered protocol family 17
                  [ ۱٫۳۴۸۴۱۵] Registering SWP/SWPB emulation handler
                  [ ۱٫۳۵۴۳۰۶] regulator-dummy: disabling
                  [ ۱٫۳۵۸۶۱۷] UBI: attaching mtd1 to ubi0
                  [ ۱٫۸۸۵۱۹۳] UBI: scanning is finished
                  [ ۱٫۸۹۶۷۹۰] UBI: attached mtd1 (name “angstram-rootfs”, size 144 MiB) to ubi0
                  [ ۱٫۹۰۳۸۴۳] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
                  [ ۱٫۹۱۰۶۳۰] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
                  [ ۱٫۹۱۷۳۱۵] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
                  [ ۱٫۹۲۴۱۵۳] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
                  [ ۱٫۹۳۰۱۶۳] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
                  [ ۱٫۹۳۷۲۷۴] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1885751282
                  [ ۱٫۹۴۶۳۰۴] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
                  [ ۱٫۹۵۵۵۰۲] UBI: background thread “ubi_bgt0d” started, PID 1084
                  [ ۱٫۹۵۵۵۰۷] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
                  [ ۱٫۹۵۹۴۴۲] ALSA device list:
                  [ ۱٫۹۵۹۴۴۶] No soundcards found.
                  [ ۱٫۹۷۵۷۹۱] UBIFS: background thread “ubifs_bgt0_0” started, PID 1086
                  [ ۲٫۰۰۴۸۶۵] UBIFS: recovery needed
                  [ ۲٫۰۷۲۳۵۴] UBIFS: recovery completed
                  [ ۲٫۰۷۶۰۱۸] UBIFS: mounted UBI device 0, volume 0, name “rootfs”
                  [ ۲٫۰۸۱۹۶۴] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
                  [ ۲٫۰۹۱۰۷۰] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
                  [ ۲٫۱۰۰۹۶۶] UBIFS: reserved for root: 0 bytes (0 KiB)
                  [ ۲٫۱۰۵۹۸۹] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 169D5274-BC1D-448D-AF98-689AB312947D, small LPT model
                  [ ۲٫۱۱۷۲۷۸] VFS: Mounted root (ubifs filesystem) on device 0:11.
                  [ ۲٫۱۲۴۶۶۷] devtmpfs: mounted
                  [ ۲٫۱۲۷۷۹۵] Freeing unused kernel memory: 204K (c06db000 – c070e000)
                  [ ۲٫۹۶۱۶۸۲] random: dd urandom read with 1 bits of entropy available
                  [ ۳٫۳۴۶۱۹۸]
                  [ ۳٫۳۴۶۱۹۸] bcm54xx_config_init
                  [ ۳٫۹۵۶۲۰۸]
                  [ ۳٫۹۵۶۲۰۸] bcm54xx_config_init
                  [ ۴۰٫۰۸۵۷۱۹] In axi fpga driver!
                  [ ۴۰٫۰۸۸۸۱۲] request_mem_region OK!
                  [ ۴۰٫۰۹۲۱۷۶] AXI fpga dev virtual address is 0xdf9fe000
                  [ ۴۰٫۰۹۷۳۰۷] *base_vir_addr = 0xc51e
                  [ ۴۰٫۱۱۲۰۱۸] In fpga mem driver!
                  [ ۴۰٫۱۱۵۳۰۵] request_mem_region OK!
                  [ ۴۰٫۱۱۸۹۰۵] fpga mem virtual address is 0xe2000000
                  [ ۱۷۱٫۹۵۷۰۲۵] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
                  [ ۱۷۱٫۹۶۳۱۲۹] xemacps e000b000.ps7-ethernet: link up (100/FULL)
                  [ ۱۷۲٫۶۵۶۱۷۲]
                  [ ۱۷۲٫۶۵۶۱۷۲] bcm54xx_config_init
                  [ ۱۷۳٫۲۸۶۱۷۹]
                  [ ۱۷۳٫۲۸۶۱۷۹] bcm54xx_config_init
                  [ ۱۷۷٫۲۸۷۰۲۰] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
                  [ ۱۷۷٫۲۹۳۰۵۸] xemacps e000b000.ps7-ethernet: link up (100/FULL)
                  log_level = 4
                  This is XILINX board. Totalram: 507486208
                  Detect 512MB control board of XILINX
                  mmap axi_fpga_addr = 0xb6fc7000
                  axi_fpga_addr data = 0xc51e
                  mmap fpga_mem_addr = 0xb5dc0000
                  forceFreq=-1 forceFlag=0
                  min work minertest[0]:912

                  DETECT HW version=0000c51e
                  miner ID : 805855811375885c
                  Miner Type = S9
                  AsicType = 1387
                  real AsicNum = 63
                  use critical mode to search freq…
                  get PLUG ON=0x000000e0
                  Find hashboard on Chain[5]
                  Find hashboard on Chain[6]
                  Find hashboard on Chain[7]
                  Check chain[5] PIC fw version=0x03
                  Check chain[6] PIC fw version=0x03
                  Check chain[7] PIC fw version=0x03
                  read pic freq and badcore num…
                  chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
                  has freq in PIC, will disable freq setting.
                  chain[5] has freq in PIC and will jump over…
                  Chain[5] has core num in PIC
                  Check chain[5] PIC fw version=0x03
                  read pic freq and badcore num…
                  chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
                  has freq in PIC, will disable freq setting.
                  chain[6] has freq in PIC and will jump over…
                  Chain[6] has core num in PIC
                  Chain[6] ASIC[17] has core num=2
                  Chain[6] ASIC[44] has core num=6
                  Check chain[6] PIC fw version=0x03
                  read pic freq and badcore num…
                  chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
                  has freq in PIC, will disable freq setting.
                  chain[7] has freq in PIC and will jump over…
                  Chain[7] has core num in PIC
                  Chain[7] ASIC[3] has core num=2
                  Chain[7] ASIC[9] has core num=2
                  Chain[7] ASIC[10] has core num=1
                  Chain[7] ASIC[15] has core num=15
                  Chain[7] ASIC[18] has core num=1
                  Chain[7] ASIC[34] has core num=6
                  Chain[7] ASIC[40] has core num=1
                  Chain[7] ASIC[41] has core num=15
                  Chain[7] ASIC[48] has core num=1
                  Chain[7] ASIC[49] has core num=5
                  Chain[7] ASIC[56] has core num=5
                  Chain[7] ASIC[59] has core num=2
                  Check chain[7] PIC fw version=0x03
                  get PIC voltage=57 on chain[5], value=910
                  get PIC voltage=6 on chain[6], value=940
                  get PIC voltage=6 on chain[7], value=940
                  chain[5] temp offset record: 62,0,0,0,0,0,35,28
                  chain[5] temp chip I2C addr=0x98
                  chain[5] has no middle temp, use special fix mode.
                  chain[6] temp offset record: 62,0,0,0,0,0,35,28
                  chain[6] temp chip I2C addr=0x98
                  chain[6] has no middle temp, use special fix mode.
                  chain[7] temp offset record: 62,0,0,0,0,0,35,28
                  chain[7] temp chip I2C addr=0x98
                  chain[7] has no middle temp, use special fix mode.
                  total_exist_chain_num = 3
                  CRC error counter=0
                  set command mode to VIL

                  — check asic number
                  After Get ASIC NUM CRC error counter=0
                  set_baud=0
                  The min freq=700
                  set real timeout 52, need sleep=379392
                  After TEST CRC error counter=0
                  search freq for 1 times, completed chain = 3, total chain num = 3
                  single_board_frq_tuning enter
                  min_rate, des_rate, fix_volt:13800, 14000, 880
                  force_freq not set, don’t need tuning
                  restart Miner chance num=2
                  waiting for receive_func to exit!
                  waiting for pic heart to exit!
                  bmminer not found= 1589 root 0:00 grep bmminer

                  bmminer not found, restart bmminer …
                  This is user mode for mining
                  Detect 512MB control board of XILINX
                  Miner Type = S9
                  Miner compile time: Mon Mar 4 11:37:08 CST 2019 type: Antminer S9set_reset_allhashboard = 0x0000ffff
                  set_reset_allhashboard = 0x00000000
                  set_reset_allhashboard = 0x0000ffff
                  miner ID : 805855811375885c
                  set_reset_allhashboard = 0x0000ffff
                  Checking fans!get fan[4] speed=6000
                  get fan[5] speed=10320
                  get fan[4] speed=6000
                  get fan[5] speed=10320
                  get fan[4] speed=6000
                  get fan[5] speed=10320
                  chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
                  Detect: use voltage limit rules on single board!
                  Detect: S9_63 use voltage level=3 : 0
                  Chain[J6] has backup chain_voltage=910
                  Check chain[5] PIC fw version=0x03
                  chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
                  Detect: use voltage limit rules on single board!
                  Detect: S9_63 use voltage level=2 : 2
                  Chain[J7] has backup chain_voltage=880
                  Check chain[6] PIC fw version=0x03
                  chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
                  Detect: use voltage limit rules on single board!
                  Detect: S9_63 use voltage level=2 : 2
                  Chain[J8] has backup chain_voltage=880
                  Check chain[7] PIC fw version=0x03
                  Chain[J6] orignal chain_voltage_pic=57 value=910
                  Chain[J7] orignal chain_voltage_pic=6 value=940
                  Chain[J7] will use backup chain_voltage_pic=880 [108]
                  Chain[J7] get working chain_voltage_pic=108
                  Chain[J8] orignal chain_voltage_pic=6 value=940
                  Chain[J8] will use backup chain_voltage_pic=880 [108]
                  Chain[J8] get working chain_voltage_pic=108
                  set_reset_allhashboard = 0x0000ffff
                  set_reset_allhashboard = 0x00000000
                  Chain[J6] has 63 asic
                  Chain[J7] has 0 asic
                  set_reset_hashboard = 0x00000040
                  set_reset_hashboard = 0x00000000
                  retry Chain[J7] has 0 asic
                  set_reset_hashboard = 0x00000040
                  set_reset_hashboard = 0x00000000
                  retry Chain[J7] has 0 asic
                  set_reset_hashboard = 0x00000040
                  set_reset_hashboard = 0x00000000
                  retry Chain[J7] has 0 asic
                  set_reset_hashboard = 0x00000040
                  set_reset_hashboard = 0x00000000
                  retry Chain[J7] has 0 asic
                  set_reset_hashboard = 0x00000040
                  set_reset_hashboard = 0x00000000
                  retry Chain[J7] has 0 asic
                  set_reset_hashboard = 0x00000040
                  set_reset_hashboard = 0x00000000
                  retry Chain[J7] has 0 asic
                  Chain[J8] has 63 asic
                  Chain[J6] has core num in PIC
                  Chain[J8] has core num in PIC
                  Chain[J8] ASIC[3] has core num=2
                  Chain[J8] ASIC[9] has core num=2
                  Chain[J8] ASIC[10] has core num=1
                  Chain[J8] ASIC[15] has core num=15
                  Chain[J8] ASIC[18] has core num=1
                  Chain[J8] ASIC[34] has core num=6
                  Chain[J8] ASIC[40] has core num=1
                  Chain[J8] ASIC[41] has core num=15
                  Chain[J8] ASIC[48] has core num=1
                  Chain[J8] ASIC[49] has core num=5
                  Chain[J8] ASIC[56] has core num=5
                  Chain[J8] ASIC[59] has core num=2
                  miner total rate=8855GH/s fixed rate=8500GH/s
                  read PIC voltage=940 on chain[5]
                  Chain:5 chipnum=63
                  Chain[J6] voltage added=0.0V
                  Chain:5 temp offset=0
                  Chain:5 base freq=606
                  Asic[ 0]:606
                  Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
                  Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
                  Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
                  Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
                  Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
                  Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
                  Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
                  Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
                  Chain:5 max freq=606
                  Chain:5 min freq=606

                  read PIC voltage=940 on chain[7]
                  Chain:7 chipnum=63
                  Chain[J8] voltage added=0.0V
                  Chain:7 temp offset=0
                  Chain:7 base freq=650
                  Asic[ 0]:650
                  Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
                  Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
                  Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
                  Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
                  Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
                  Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
                  Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
                  Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
                  Chain:7 max freq=650
                  Chain:7 min freq=650

                  Miner fix freq …
                  read PIC voltage=940 on chain[5]
                  Chain:5 chipnum=63
                  Chain[J6] voltage added=0.0V
                  Chain:5 temp offset=0
                  Chain:5 base freq=606
                  Asic[ 0]:606
                  Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
                  Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
                  Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
                  Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
                  Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
                  Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
                  Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
                  Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
                  Chain:5 max freq=606
                  Chain:5 min freq=606

                  read PIC voltage=940 on chain[7]
                  Chain:7 chipnum=63
                  Chain[J8] voltage added=0.0V
                  Chain:7 temp offset=0
                  Chain:7 base freq=650
                  Asic[ 0]:650
                  Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
                  Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Detect a bad chip=15 on chain[7], fixed to 400M
                  Asic[15]:650 Asic[16]:650
                  Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
                  Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
                  Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
                  Detect a bad chip=41 on chain[7], fixed to 400M
                  Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
                  Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
                  Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
                  Chain:7 max freq=650
                  Chain:7 min freq=650

                  max freq = 650
                  set baud=1
                  Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
                  chain[5] temp chip I2C addr=0x98
                  chain[5] has no middle temp, use special fix mode.
                  Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
                  New offset Chain[5] chip[244] local:31 remote:30 offset:31
                  Chain[J6] chip[244] get middle temp offset=31 typeID=55
                  Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
                  chain[7] temp chip I2C addr=0x98
                  chain[7] has no middle temp, use special fix mode.
                  Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
                  New offset Chain[7] chip[244] local:30 remote:32 offset:28
                  Chain[J8] chip[244] get middle temp offset=28 typeID=55
                  Chain[J6] set working voltage=910 [57]
                  Chain[J8] set working voltage=880 [108]
                  do heat board 8xPatten for 1 times
                  start send works on chain[5]
                  start send works on chain[7]
                  get send work num :57456 on Chain[5]
                  get send work num :57456 on Chain[7]
                  wait recv nonce on chain[5]
                  wait recv nonce on chain[7]
                  get nonces on chain[5]
                  require nonce number:912
                  require validnonce number:57456
                  asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
                  asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
                  asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
                  asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
                  asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
                  asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
                  asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
                  asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912

                  Below ASIC’s core didn’t receive all the nonce, they should receive 8 nonce each!

                  freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
                  freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
                  freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
                  freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
                  freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
                  freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
                  freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
                  freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606

                  total valid nonce number:57456
                  total send work number:57456
                  require valid nonce number:57456
                  repeated_nonce_num:0
                  err_nonce_num:24973
                  last_nonce_num:29091
                  get nonces on chain[7]
                  require nonce number:912
                  require validnonce number:57456
                  asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
                  asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
                  asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
                  asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
                  asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
                  asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
                  asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
                  asic[56]=906 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912

                  Below ASIC’s core didn’t receive all the nonce, they should receive 8 nonce each!

                  asic[56]=906
                  core[113]=2

                  freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
                  freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
                  freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
                  freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
                  freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
                  freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
                  freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
                  freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650

                  total valid nonce number:57450
                  total send work number:57456
                  require valid nonce number:57456
                  repeated_nonce_num:0
                  err_nonce_num:26327
                  last_nonce_num:24315
                  chain[5]: All chip cores are opened OK!
                  Test Patten on chain[5]: OK!
                  chain[7]: All chip cores are opened OK!
                  Test Patten on chain[7]: OK!
                  setStartTimePoint total_tv_start_sys=209 total_tv_end_sys=210
                  restartNum = 2 , auto-reinit enabled…
                  do read_temp_func once…
                  do check_asic_reg 0x08

                  get RT hashrate from Chain[5]: (asic index start from 1-63)
                  Asic[01]=39.6110 Asic[02]=37.4800 Asic[03]=37.5300 Asic[04]=37.8320 Asic[05]=39.0900 Asic[06]=409.615 Asic[07]=38.8050 Asic[08]=38.5870
                  Asic[09]=38.2850 Asic[10]=85.8150 Asic[11]=38.0840 Asic[12]=38.2520 Asic[13]=37.9500 Asic[14]=38.6710 Asic[15]=37.8820 Asic[16]=37.3790
                  Asic[17]=39.2080 Asic[18]=37.6980 Asic[19]=38.0500 Asic[20]=38.6880 Asic[21]=39.0740 Asic[22]=36.6410 Asic[23]=37.7310 Asic[24]=37.4290
                  Asic[25]=38.2520 Asic[26]=38.5540 Asic[27]=38.9560 Asic[28]=37.9660 Asic[29]=38.9560 Asic[30]=38.7210 Asic[31]=37.0270 Asic[32]=38.2350
                  Asic[33]=36.6240 Asic[34]=37.6310 Asic[35]=38.3860 Asic[36]=38.1010 Asic[37]=38.8890 Asic[38]=378.242 Asic[39]=38.1680 Asic[40]=38.8560
                  Asic[41]=37.1610 Asic[42]=38.4530 Asic[43]=38.0170 Asic[44]=37.4970 Asic[45]=39.0400 Asic[46]=37.8990 Asic[47]=38.0500 Asic[48]=36.6410
                  Asic[49]=37.0270 Asic[50]=37.7310 Asic[51]=37.7310 Asic[52]=38.4360 Asic[53]=38.4360 Asic[54]=410.706 Asic[55]=38.5700 Asic[56]=38.8050
                  Asic[57]=40.6170 Asic[58]=37.4460 Asic[59]=38.0500 Asic[60]=38.2520 Asic[61]=38.2520 Asic[62]=36.8090 Asic[63]=39.2580

                  get RT hashrate from Chain[7]: (asic index start from 1-63)
                  Asic[01]=35.3830 Asic[02]=33.6880 Asic[03]=34.1580 Asic[04]=34.0740 Asic[05]=34.9460 Asic[06]=33.5870 Asic[07]=34.9460 Asic[08]=146.448
                  Asic[09]=34.5100 Asic[10]=33.9730 Asic[11]=34.0570 Asic[12]=249.762 Asic[13]=34.2080 Asic[14]=34.4600 Asic[15]=33.8730 Asic[16]=28.9570
                  Asic[17]=35.1140 Asic[18]=33.8560 Asic[19]=34.0740 Asic[20]=34.7280 Asic[21]=35.1310 Asic[22]=33.2020 Asic[23]=33.9230 Asic[24]=63.8700
                  Asic[25]=34.3420 Asic[26]=34.5100 Asic[27]=35.2320 Asic[28]=34.2080 Asic[29]=37.2950 Asic[30]=35.0140 Asic[31]=33.0840 Asic[32]=34.6110
                  Asic[33]=32.5980 Asic[34]=33.8730 Asic[35]=34.0400 Asic[36]=34.7620 Asic[37]=34.9630 Asic[38]=34.6110 Asic[39]=34.0570 Asic[40]=34.7120
                  Asic[41]=33.4530 Asic[42]=30.3490 Asic[43]=34.4100 Asic[44]=33.5710 Asic[45]=34.9460 Asic[46]=34.2080 Asic[47]=34.2080 Asic[48]=32.7650
                  Asic[49]=33.2690 Asic[50]=33.6210 Asic[51]=33.9730 Asic[52]=34.9460 Asic[53]=34.2590 Asic[54]=34.7120 Asic[55]=34.8120 Asic[56]=35.3990
                  Asic[57]=36.0370 Asic[58]=33.7720 Asic[59]=34.3420 Asic[60]=146.028 Asic[61]=34.2920 Asic[62]=33.2350 Asic[63]=115.662
                  Check Chain[J6] ASIC RT error: (asic index start from 1-63)
                  Asic[06]=409.615000
                  Asic[38]=378.242000
                  Asic[54]=410.706000
                  Check Chain[J8] ASIC RT error: (asic index start from 1-63)
                  Asic[08]=146.448000
                  Asic[12]=249.762000
                  Asic[60]=146.028000
                  Asic[63]=115.662000
                  Done check_asic_reg
                  do read temp on Chain[5]
                  Chain[5] Chip[62] TempTypeID=55 middle offset=31
                  Chain[5] Chip[62] local Temp=60
                  Chain[5] Chip[62] middle Temp=44
                  Special fix Chain[5] Chip[62] middle Temp = 75
                  Done read temp on Chain[5]
                  do read temp on Chain[7]
                  Chain[7] Chip[62] TempTypeID=55 middle offset=28
                  Chain[7] Chip[62] local Temp=62
                  Chain[7] Chip[62] middle Temp=71
                  Special fix Chain[7] Chip[62] middle Temp = 77
                  Done read temp on Chain[7]
                  set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=2 fix_fan_steps=0
                  set normal FAN speed…
                  FAN PWM: 74
                  read_temp_func Done!
                  CRC error counter=0

                  تازه وارد پاسخ داده شده در خرداد ۱۸, ۱۳۹۸.
                  افزودن نظر

                  پاسخ شما

                  برای ارسال سوال, شما باید شرایط و ضوابط و شرایط استفاده از خدمات را قبول کنید